|
01 - "Hardness Anomalies on Cr1-xFex
(0.05<x<0.323) Alloys: Mössbauer Effect Study". B. Trindade, R.
Vilar. Hyperfine Interact. 60 (1-4) (1990) 919. pdf
02 -"Influence of Nickel on the 475ºC
Embrittlement of Fe-Cr-Ni Alloys: Mössbauer Effect Study". B.
Trindade, R. Vilar. Hyperfine Interact. 66 (1991) 351.
pdf
03 -"Structural Characterization of
Co-Sputtered W-Fe-C Films". B. Trindade, M. T. Vieira. Thin Solid
Films, 206 (1991) 318.
pdf
04 -"Structural Analysis of Sputtered (W-C)1-xMx
(M=Fe,Co) Films with 0<x<0.20" A. Cavaleiro, B. Trindade, M. T.
Vieira. Surface Coatings and Technology, 60 (1993) 411.
pdf
05 -"Characterization of W-Me-C (Me=Fe,Co)
Films and Their Structural Behaviour with Temperature". B. Trindade, M. T.
Vieira, E. Bauer-Grosse. Materials Science and Engineering A 174 (1994)
165. pdf
06 -"Structural Stability and
Crystallization Studies of Metastable Sputtered W-Ni-C Films". B.
Trindade, M. T. Vieira, E. Bauer-Grosse. Thin Solid Films, 252
(1994) 82. pdf
07 -"In-Situ High Temperature
Crystallization Study of Sputtered Deposited Amorphous W-Fe-C Films". B.
Trindade, M. T. Vieira, E. Bauer-Grosse. Acta Metalurgica et Materialia,
43 1 (1995) 93.
pdf
08 -"Influence of Titanium on the
Structural Stability of Sputtered W-Co-C Films". B. Trindade, M. T. Vieira,
E. Bauer-Grosse. Surface Coatings and Technology, 74-75 (1995) 802. pdf
09 -"Amorphous Phase Forming Ability in
(W-C)-Based Sputtered Films". B. Trindade, M. T. Vieira, E. Bauer-Grosse.
Acta
Materialia, 46 5 (1998) 1731. pdf
10 -
"Crystallisation Kinetics of
Amorphous W-Co-C Sputtered Films". B. Trindade, M. T. Vieira. Thin
Solid Films 322 (1998) 68.
pdf
11 -
"Mechanical Behaviour of Sputtered
M-Fe-C (M=Cr,Mo,W) Carbides". B. Trindade, M. T. Vieira, A.M. Amaro, J.S.
Cirne. Materials Research Society, "Fundamentals of Nanoindentation
and Nanotribology", vol. 522, (1998) pág. 305.
pdf
12 -
"The Influence of Silver on the
Structure and Mechanical Properties of (TiAl)-Based Intermetallics". M. T.
Vieira, B. Trindade, A.S. Ramos, J.V. Fernandes, M.F. Vieira. Thin Solid
Films 343-344 (1999) 42.
pdf
13 -
"Deposition and Characterisation of
Fine-Grained W-Ni-C/N Films". A. Cavaleiro, B. Trindade and M. T. Vieira.
Surface
and Coatings Technology 116-119 (1999) 944.
pdf
14 -
"Structure and Properties of
Sputtered TiAl-M (M=Cr,Ag) Thin Films". C. Coelho, S. Ramos, B. Trindade, M.T. Vieira, J.V. Fernandes, M. Vieira.
Surface and Coatings Technology
120-121 (1999) 297.pdf
15 -
"Characterisation of Modified
(TiAl)-Based Materials Doped with Silver and Chromium". C. Coelho, A.S.
Ramos, B. Trindade, M.T. Vieira, J.V. Fernandes, M. Vieira. Key
Engineering Materials 188 (2000) 37. pdf
16-
"An Approach Using Thin Films as a
Predictive Way to Produce New Bulk Materials". M.T. Vieira, A.S. Ramos, B.
Trindade, J.V. Fernandes, M. Vieira. Surface and Coatings
Technology, 131 (2000) 162. pdf
17 -
"Synthesis and Characterisation of
New Sputtered Metastable Carbides". G. Tomé, B. Trindade, M.T.
Vieira. Vacuum 64/3-4 (2002) 205. pdf
18 -
"On the Evaluation of Ductility of
Thin Films" J.M. Antunes, L.F. Fernandes, M.F. Vieira, J.V. Fernandes, B.
Trindade, A.S. Ramos, M.T. Vieira. Materials Science and Engineering
A 337 (2002) 97.
pdf
19-
"Mechanical Characterisation of g-TiAl
Thin Films Obtained by Two Different Sputtering Routes". M.T. Vieira, B.
Trindade, A.S. Ramos, J.V. Fernandes, M.F. Vieira. Materials Science and
Engineering A 329-331 (2002) 147. pdf
20 -
"Production of Ti-Mg-Si Thin Films
by Magnetron Sputtering and Their Phase Transformations with Temperature".
C. Coelho, B. Trindade, F.H. Froes. Key Engineering Materials 230-232 (2002)
64.pdf
21 -
"Mg-rich Light Alloys Synthesised
by Mechanical Alloying". L.Dias, C. Coelho, B. Trindade, F.H. Froes. Key
Engineering Materials 230-232 (2002) 283. pdf
22 -
"Influence of the Heat Treatment on the
Structure of (W,Si)N Sputtered Films". L. Ferreira, C. Louro, A.
Cavaleiro, B. Trindade. Key Engineering Materials 230-232 (2002) 640.
pdf
23 -
"Mechanical Alloying of Fe-Cu
Alloys from As-received and from Premilled Elemental Powder Mixtures".
F.M. Lucas, B. Trindade, B.F.O. Costa, G. Le Caër. Key Engineering
Materials 230-232 (2002) 631. pdf
24 -
"The Effects of a Third Element on
the Structure and Properties of W-C/N". M. T. Vieira, A. Cavaleiro,
B. Trindade. Surface and Coatings Technology 151-152 (2002) 495.
pdf
25 -
"The Influence of Pre-Milling on
the Microstructural Evolution During Mechanical Alloying of a Fe50Cu50 Alloy."
F.M. Lucas, B. Trindade, B.F.O. Costa, G. Le Caer. Journal of
Nanocrystalline and Metastable Materials.18 (2003) 49.
pdf
26 -
"Modification of the Structural
Order of Transition Metal - Carbon Systems by the Addition of a Group VIII
Element". B. Trindade, M. T. Vieira. Materials Science &
Engineering A., 352/1-2 (2003) 195.
pdf
27 -
"
Solid state reactions
of mechanical Alloyed
Ti-Al and Ti-Si intermetallic Powders coated with Aluminium". F. Simões, B. Trindade, J.A. Santos, F.H. Froes. Materials Technology
18/2 (2003)
98-101.
pdf
28 -
"Mechanical Alloying of Mg-Ti-Si Light Alloys
and Subsequent Consolidation by HIP". L. Dias, C. Coelho, B.
Trindade, F.H. Froes. Materials
Technology 18/3 (2003) 140-144.
pdf
29-
"Production and Consolidation of
Nanostructured Mechanically Alloyed Ti-Al-Ag Intermetallics". F.
Neves, M.H. Carvalho, B. Trindade. Materials
Technology 18/4 (2003) 224-229.
pdf
30 -
"Influence of Ti Addition on the Properties of
W-Ti-C/N Sputtered Films". A. Cavaleiro, B. Trindade, M.T.
Vieira. Surface and Coatings
Technology 174-175 (2003) 68-75.
pdf
31 -
"Ti-Mg-Si Alloys produced by
Non-equilibrium Processing Methods: Mechanical Alloying and Sputtering".
L. Dias, C. Coelho, B. Trindade, F.H. Froes. Materials Science & Engineering A.
364 (1-2) (2004) 273-280.
pdf
32 -
"Thermal Behaviour of
Nanostructured Intermetallics Synthesized by Mechanical Alloying and Coated with
Metal Elements ". F. Simões, B. Trindade, J.A. Santos. Materials Science
Forum 455-456 (2004) 285-289.
pdf
33 -
"Corrosion Resistance of Two Ternary
Mg88Ti5Si7 and Mg60Ti10Si30 Alloys Synthesised by Mechanical Alloying". L.
Dias, B. Trindade, R. Fischer, S. Mies, C.M.A. Brett. Materials Science Forum
455-456 (2004) 317-321.
pdf
34 -
"Process
Development of
g-TiAl
Based Alloys and their Consolidation".
F. Neves, M.H. Carvalho, B. Trindade. Materials
Science Forum 455-456 (2004) 505-509.
pdf
35 -
"High Performance Cements
and Advanced Ordinary Portland Cement Manufacturing by HEM-refinement and Activation".
Zoz H, Jaramillo D, Tian Z, Trindade B, Ren H, Chimal-V O, de la Torre. ZKG INTERNATIONAL 57 (1): 60-70 2004.pdf
36 -
"The Mechanochemical Processing of
Aerospace Metals”. F.H. (Sam) Froes, B. Trindade. Journal of Materials
Science 39 (16-17) (2004) 5019-5022.
pdf
37 -
"Structural
and Mechanical-Properties of Hot-Pressed Surface Modified TixSi1-x (x=62.5
and 85 at.%) Powders Synthesized by Mechanical Alloying".
F. Simões and B. Trindade.
Materials Science &
Engineering A
397 (2005) 257-263.pdf
38 -
"Characterisation
by EIS of Ternary Mg Alloys Synthesised by Mechanical Alloying".
C.M.A. Brett, L.
Dias, B. Trindade, R. Fischer, S. Mies.
Electrochimica Acta
51 (2006) 1752-1760.pdf
39 -
"Formation
of Ti-Matrix Composites for Lightweight Structural Components by
Mechanical Alloying and Subsequent Annealing.
B. Trindade,
M. Caetano, N. Duarte. Materials Science Forum
514-516 (2006) 609-613.pdf
40 -
"On the Formation of Intermetallic Matrix Composites Produced by
Mechnical Alloying and Sputtering”. Filipe Neves, Nelson Duarte, Bruno
Trindade. Journal of Alloys and
Compounds 434 (2007) 378-382.
pdf
41 -"Nanostructured
coated powders for structural net shape components”.
J. M. Castanho, M. T.
Vieira, B.Trindade. Journal of Alloys and Compounds
434 (2007) 383-385.
pdf
42 -"The Influence of Magnetron Sputtered Silver and Titanium Coatings on
the compaction and Properties of Surface Modified PM Ti-48Al Powders”.
Filipe Neves, Bruno Trindade. Journal of Materials Science
42 (12) (2007) 4197-4204.
pdf
43 -" Synthesis of a lightweight Ti-10Al-5Mg (wt. %) alloy by
mechanical alloying followed by compaction and sintering". M.
Caetano, B. Trindade. Journal of Materials Science 42 (18)
(2007) 7684-7689.
pdf
44 -“Interfacial design of Cu-based composites prepared by Powder
Metallurgy”. Th. Schubert, B. Trindade, T. Weissgärber.
Materials Science & Engineering A 475 (2008)
39-44.
pdf
45 -"Sinterability of mechanically alloyed Ti-37.5Si powders coated
with of metallic thin layer by sputtering”. F. Simões, N.
Duarte, B. Trindade. Reviews on Advanced Materials
Science 18 (2008) 293-296.
pdf
46 -“Effect of Cu on the sintering ability of surface modified
Ti5Si3-based alloy synthesized by Mechanical Alloying”. Marco
Caetano, Filipe Oliveira, R. Silva, Fernando Simões, B.
Trindade. Reviews on Advanced Materials Science
18 (2008) 339-343.pdf
47 -“Synthesis of La9.33(SiO4)O2 Apatite-Type by Mechanical
Alloying”. M.M. Vieira, J.C. Oliveira, B. Trindade.
Reviews on Advanced Materials Science 18 (2008)
344-348.
pdf
48 -"Mixed Si/Ge Apatite-Type Phase Produced by Mechanical Alloying
for Application as Electrolyte of SOFCs". M.M. Vieira, J.C.
Oliveira, A. Cavaleiro, B. Trindade. Materials
Science Forum 587-588 (2008) 128-132.
pdf
49 -“Improvement of the Bonding Interphase of a Sintered Al
2014-(Ti5Si3)p Composite by the Copper Coating of the
Reinforcement”, E.M. Ruiz-Navas , M.L. Delgado, B. Trindade,
Composites Part A: Applied Science and Manufacturing
40 (8) (2009) 1283-1290.pdf
50 -“Effect of Ni and Cu intermediate layers on the sinterability of
a Ti-35Si-10Mg (% at.) mixture synthesized by mechanical
alloying”, M. Caetano, F.J. Oliveira, R.F. Silva, F. Simoes and
B. Trindade,
Reviews on Advanced Materials Science
21 (2009) 173-182.
pdf
51 -“Nanostructured
Mo3Al-based composites strengthened by Al2O3 precipitates”, A.
Sakly, J. Costa, B. Trindade, J.V. Fernandes and T. Benameur,
Jounal of Alloys and Compounds
502 (2010) 480-487. pdf |